Q7 Quattro V8-4.2L (BAR) (2008)
‹› If the roof reinforcement is damaged during removal, such as with tears or kinks, it must be replaced.
Installing old roof reinforcement
-
Apply new adhesive between adhesive beads - 3 -.
-
Apply new adhesive near peripheral adhesive bead - 2 -.
Installing new roof reinforcement
-
Place adhesive bead - 2 - on roof reinforcement - 1 - at a distance of - a - to outer edge, as shown illustration.
‹› Dimension - a - = 25 mm all around
-
Apply adhesive beads - 3 - to roof reinforcement, approx. 10 lengthwise as shown in illustration.
All:
-
Position roof reinforcement centered to outer sides and roof braces - 4 - to - 7 -.
‹› Holes - arrows - must be in direction of travel on left side of vehicle.
-
Push roof reinforcement from inside onto body roof.
-
Install headliner.
Sun Visors
‹› Double sun visor is shown in illustration