Q7 Quattro V8-4.2L (BAR) (2008)
Headliner: Service and Repair
Single Sun Visor
Sun Visor
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Disengage sun visor (rear sun visors on vehicles with double sun visor) in vehicle center at sun visor center bearing and fold it to side.
-
Unclip sun visor center bearing cover with a small screwdriver and remove screw.
-
Carefully unclip cover cap - 3 - with Trim Removal Wedge (3409).
-
Remove screws - arrow A - and - arrow B -.
-
Loosen sun visor - 1 - and - 2 - on vehicles with double sun visor from roof crossmember.
-
Disconnect visor from wiring harness.