Q7 Quattro V8-4.2L (BAR) (2008)
2. Measure the dimensions at several points on each of the three sunroof panels (front panel, middle panel, and rear panel).
Adjust the panels if necessary.
The gaps, labeled in Figure 1, should measure as listed below (in mm):
A = -1.2 +/- 0.5
B = 0 +/- 0.5
C = -0.6 +/- 0.5
D = 0.4 +/- 0.5
E = 10
F = 1.5
G = 1.5
H = 11
The gap labeled A in Figure 2 should measure 11 mm.