Q7 Quattro V8-4.2L (BAR) (2008)
/Page-3983002.png)
-
Pry the cable - 1 - in - direction of arrow - from the bracket - 2 -.
-
Remove cable - 1 - from clip - 3 - and disengage cable.
-
Remove the bolts - 1 -.
-
When removing headrests, ensure cable is not jammed.
Installing
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Clean nut threads for screws - 1 -.
-
Insert screws - 1 -.
Tightening specification refer to => [ Headrest Assembly Overview ] See: Service and Repair/Removal and Replacement/Third Row Seat
