Q7 Quattro V8-4.2L (BAR) (2008)
Head Rest: Service and Repair
Headrest Cover
Headrest Cover
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
Removing
-
Unclip headrest cover - 2 -.
Begin unclipping on rear side of headrest cover.
Use Trim Removal Wedge (3409) to unclip.
-
Remove headrest cover - 2 - from headrest carrier - 1 -.
-
Pull loop - 3 - out of headrest cover.
Installing
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Before clipping headrest cover, pull loop through opening in cover.
-
Ensure headrest cover is clipped in correctly.