Q7 Quattro V8-4.2L (BAR) (2008)
/Page-4050001.png)
Seat Cover: Service and Repair
Backrest Cover and Upholstery
Backrest Cover and Upholstery
Special tools, testers and auxiliary items required
‹› Upholstery clip pliers (V.A.G 1634)
Separating cover and padding from backrest frame:
Removing
-
Remove seat bench. Refer to => [ Bench Seat, 2nd Row ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove LATCH caps. Refer to => [ LATCH Cap ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove seat cushion. Refer to => [ Seat Cushion ] See: Service and Repair/Removal and Replacement/2nd Row, 2-Seater.
-
Remove seat heating connector.
-
Remove left side trim. Refer to => [ Outer Part Left Side Trim Panel ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove lower left trim on rear side. Refer to => [ Lower Left Rear Side Trim Panel ] See: Service and Repair/Removal and Replacement/2nd
Row, 3-Seater.
-
Loosely attach center belt. Refer to => [ Center 2nd Row Three-Point Seat Belt Component Overview ] See: Restraint Systems/Seat Belt
Systems/Service and Repair/Removal and Replacement.
-
Remove handle (Easy Entry). Refer to => [ Handle, Easy Entry ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove trim (Easy Entry). Refer to => [ Trim Panel, Easy Entry ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove headrest cover. Refer to => [ Outer Headrest Cover ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Remove the headrests. Refer to => [ Outer Headrests ] See: Description and Operation/2nd Seat Row, 3-Seater.
-
Remove center belt trim. Refer to => [ Center Belt Trim Panel ] See: Service and Repair/Removal and Replacement/2nd Row, 3-Seater.
-
Fold up center seat.
