Q7 Quattro V8-4.2L (BAR) (2008)
Hood Weatherstrip: Service and Repair
Hood Seal
1
Gasket for lock carrier
‹› Apply seal at left and right on foam piece.
‹› When doing this, make sure it is applied without gaps.
‹› Compress excess length of seal along lock carrier.
2
Right sealing profile
‹› Self-adhering, adhesion surfaces must be free of dust and grease.
3
Seal for plenum chamber
‹› Apply seal at left and right on foam piece.
‹› When doing this, make sure it is applied without gaps.
‹› Compress excess length of seal along front panel of plenum chamber.
4
Left sealing profile