Q7 Quattro V8-4.2L (BAR) (2008)
Brake Caliper: Removal and Replacement
Brake Caliper, 18" Plus Assembly Overview
Brake Caliper, 18" Plus Assembly Overview
After replacing brake pads, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
Use Brake Filler/Bleeder Unit (VAS 5234) to extract brake fluid from brake fluid reservoir.
Before removing brake caliper or disconnecting brake hose, brake pedal actuator (V.A.G 1869/2) must be inserted (this dissipates pressure).
1
Stub axle carrier
2
Brake disc cover plate
3
Bolt
‹› Tightening specification: 20 Nm
4
Brake shoes
‹› Without wear indicator
‹› Minimum pad thickness 1 mm
‹› Removing and installing, refer to => [ Brake Shoes ] See: Parking Brake System/Parking Brake Shoe/Service and Repair
5
Compression spring