Q7 Quattro V8-4.2L (BAR) (2008)
‹› Removing and installing. Refer to => [ Rear Brake Caliper Piston ] See: Overhaul/Rear Brake Caliper Piston
6
28 mm piston
‹› Removing and installing. Refer to => [ Rear Brake Caliper Piston ] See: Overhaul/Rear Brake Caliper Piston
‹› First apply thin coat of brake cylinder paste (G 052 150 A2) on piston
7
Piston 30 mm/32 mm
‹› Removing and installing. Refer to => [ Rear Brake Caliper Piston ] See: Overhaul/Rear Brake Caliper Piston
‹› Apply thin coat on piston beforehand
8
Protective caps for 28 mm piston
‹› Do not damage when installing piston
9
Piston 30 mm/32 mm protective caps
‹› Do not damage when installing piston
10
Connecting pipe
‹› Not installed on all models
‹› Tightening specification: 17 Nm
11
Torx bolt
12
Protective plate
‹› Not installed on all models