Q7 Quattro V8-4.2L (BAR) (2008)
-
If necessary, close the cable clip on the spring.
‹› The cable for the brake pad wear display may not lay open.
-
Install wheels.
Tightening specification for wheel bolts.
-
Remove brake pedal loading device (V.A.G 1869/2).
-
Bleed brake system. Refer to => [ Brake System, Bleeding ] See: Brake Bleeding/Service and Repair
-
Install wheels.
‹› Before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
‹› Check brake fluid level.