Q7 Quattro V8-4.2L (BAR) (2008)
‹› Removing and installing, refer to => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston
6
Seal for 38 mm piston
‹› Removing and installing, refer to => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston
7
34/30 mm piston
‹› Removing and installing, refer to => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston
‹› First apply thin coat of brake cylinder paste (G 052 150 A2) on piston
8
36/34 mm piston
‹› Removing and installing, refer to => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston
‹› First apply thin coat of brake cylinder paste (G 052 150 A2) on piston
9
38 mm piston
‹› Removing and installing, refer to => [ Front Brake Caliper Piston ] See: Overhaul/Front Brake Caliper Piston
‹› First apply thin coat of brake cylinder paste (G 052 150 A2) on piston
10
Protective cap for 34/30 mm piston
‹› Do not damage when installing piston
11
Protective cap for 36/34 mm piston
‹› Do not damage when installing piston
12
Protective caps for 38 mm piston
‹› Do not damage when installing piston
13
Connecting pipe
‹› Tightening specification: 17 Nm
‹› Not installed on all models