Q7 Quattro V8-4.2L (BAR) (2008)
/Page-938007.png)
-
Remove engine wiring harness bracket from coolant pipe and set it to the rear.
‹› To improve clarity, the removed engine is shown from the rear.
-
Remove nut - 1 - and bolt - 2 - on rear right coolant pipe.
‹› Rear right coolant pipe remains in installation location.
-
Disconnect electrical connector - arrow - at Engine Coolant Temperature (ECT) sensor (G62).
-
Remove coolant hose - 3 - to heater core from rear coolant pipe.
