Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove right cylinder head cover bolts in sequence - 16 to 1 -.
-
Remove cylinder head cover.
Installing
‹› Tightening specifications, refer to => [ Right Cylinder Head Cover, Tightening Specifications
and Sequence ] See: Service and Repair/Cylinder Head Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace cylinder head cover gaskets if damaged.
‹› Replace bolts for cylinder head cover if gasket is damaged.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Clean the sealing surfaces, they must be free of oil and grease.
-
Tighten cylinder head cover bolts. Refer to => [ Right Cylinder Head Cover, Tightening Specifications
and Sequence ] See: Service and Repair/Cylinder Head Assembly Overview.