Q7 Quattro V8-4.2L (BAR) (2008)
/Page-889007.png)
‹› Both camshaft adjusters must be able to still be rotated on camshaft and must not tip.
-
Remove (T40071).
-
Position (T40079) on intake camshaft adjuster at left cylinder head.
-
Position (V.A.G 1332) with (V.A.G 1332/9) on (T40079).
-
Have a second technician pre-tension camshaft adjuster to 40 Nm in direction of - arrow -.
-
Tighten bolts as follows while camshaft adjuster is held under pre-tension:
-
Position (T40079) on exhaust camshaft adjuster at right cylinder head.
