Q7 Quattro V8-4.2L (BAR) (2008)
/Page-987004.png)
-
Disconnect electrical harness connector - 2 - from Evaporative Emission (EVAP) canister purge regulator valve (N80).
-
Remove Evaporative Emission (EVAP) canister purge regulator valve (N80) - 1 - from bracket and lay aside.
‹› Ignore - 3 -.
-
Disconnect the vacuum hose - 4 -.
CAUTION!
Risk of violating emissions legislation.
‹› Do not open hose connection - 2 -!
-
Lay the air guide hose aside with the vacuum hose connected.
-
Loosen hose clamp - 1 - and remove bolts - 3 -.
