Q7 Quattro V8-4.2L (BAR) (2008)
/Page-989002.png)
‹› Ignore - 1 -.
-
Remove right main catalytic converter bracket bolts - 1 - and - 2 -.
-
Remove nuts - arrows - and remove right main catalytic converter.
Installing
‹› Tightening specifications, refer to => [ Exhaust System Assembly Overview ] See: Service and Repair/Exhaust System Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace gaskets and self-locking nuts.
-
Align exhaust system free of tension. Refer to => [ Exhaust System, Installing ] See: Service and Repair/Exhaust System, Installing.
-
On a vehicle with air suspension, deactivate vehicle lift mode.
