Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove front door trim.
-
Detach insulating mat from door trim.
-
Disconnect electrical connector - 2 - on Rear Lid Remote Control Lock Switch (E233) and Fuel Tank Lid Unlock Button (E319) - item 1 -.
-
Carefully release catches - A arrows - using a small screwdriver.
-
Press Rear Lid Remote Control Lock Switch (E233) and Fuel Tank Lid Unlock Button (E319) down out of switch mount - arrow B -.
Installing
Install in reverse order of removal, observing the following:
-
Press switch into switch mount until fasteners engage.
-
Install front door trim.
Window Regulator Switch
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Detach insulating mat from door trim.