Q7 Quattro V8-4.2L (BAR) (2008)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb
Removing
-
Remove fog lamp.
-
Release securing guides - arrows - at cap - 1 -.
-
Disconnect electrical connectors - 1 - and - 2 - on bulb.
-
Disengage wire clamp - 3 - and remove bulb - 4 - from housing.
Installing
Install in reverse order of removal, observing the following:
-
Insert the new bulb (H7 - 12 V, 55 W) into the housing without touching the bulb with bare hands.
-
Secure bulb with spring clip.
-
Reconnect harness connectors and close housing cover.
-
Adjusting fog lamps.