Q7 Quattro V8-4.2L (BAR) (2008)
-
Carefully press cover - 1 - down - arrow -.
-
Press entry light - 3 - in exterior mirror out of cover - 2 -.
-
Disconnect connector - 1 - on entry light.
Installing
Install in reverse order of removal, observing the following:
‹› Entire entry light in exterior mirror must be replaced if LED is faulty.
-
Attach mirror glass at mirror adjusting unit and press on mirror glass.
‹› Only press on the center of the mirror.
Tightening Specifications
Turn Signal Switch
Removing