Q7 Quattro V8-4.2L (BAR) (2008)
Alignment: Service and Repair
Front Axle Camber, Adjusting
Front Axle Camber, Adjusting
Special tools, testers and auxiliary items required
‹› Socket (T10188)
-
Remove connector nut - 2 - and install new nut as far as stop.
-
Adjust camber by rotating eccentric bolt.
‹› The maximum adjustment range is 90° to left or right of center position.
-
Tighten nut - 2 - with (T10188).
-
After nut - 2 - has been tightened, check camber value again.
CAUTION!
Every time camber is corrected, axle alignment values should be checked.