Q7 Quattro V8-4.2L (BAR) (2008)
-
"J428 - Distance Regulation Control Module, adjustment".
Now follow instructions on screen to perform adjustment.
-
Use screws - 1 - and - 2 - for fine adjustment in "Guide Fault-Finding".
CAUTION!
The ACC adjustment is only accepted if "actuator test ended " is displayed in (VAS 5051/B).
-
Switch ignition off.
-
Disconnect (VAS 5051/5A) connector from diagnostic connection.
-
Disconnect battery charger.
-
Install license plate holder. Refer to => Bumper See: Body and Frame/Bumper.