Q7 Quattro V8-4.2L (BAR) (2008)
Fluid Filter - A/T: Service and Repair
ATF Strainer
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
‹› 3 threaded studs M6 x 70 (self-fabrication)
Removing
-
Remove oil pan. Refer to => [ Oil Pan ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.
-
Remove bolts - arrows -.
-
Pull off oil strainer.
Installing
-
Push new gasket - 1 - onto the intake flange of the oil strainer - arrow - and wet with ATF.
The threaded studs M6 x 70 - arrows - are needed to guide the oil strainer.