Q7 Quattro V8-4.2L (BAR) (2008)
-
Install 3 threaded studs M6 x 70 into the valve body by hand.
-
Place oil strainer onto the threaded studs.
-
Carefully press suction collar into the opening at valve body up to stop.
-
Tighten oil strainer bolts - arrows -.
-
Install oil pan. Refer to => [ Oil Pan ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Pan/Service and Repair.
-
After installation, fill with ATF, check ATF level, and top off. Refer to => [ ATF, Draining or Filling after Repair ] See: Fluids/Fluid -
A/T/Service and Repair/ATF, Draining or Filling after Repair.
Tightening Specifications