Q7 Quattro V8-4.2L (BAR) (2008)
Tire Pressure Module: Service and Repair
Directional Stabilization Assistance Control Module and Lens Screen
Directional Stabilization Assistance Control Module and Lens Screen
Removing
-
Remove the cover trim - 1 - down from the bracket in the direction of the arrow.
-
Press the retaining clamp - 1 - in the - direction of the arrow - and remove the Directional Stabilization Assistance Control Module (J759)
sideways and down from the bracket.
-
Disconnect the electrical connector and remove the directional stabilization assistance control module.
-
Press the clamps - arrows -, pull the lens screen out of the bracket and remove it toward the rear.