Q7 Quattro V8-4.2L (BAR) (2008)
/Page-1322001.png)
Transmission Position Switch/Sensor: Service and Repair
Tiptronic Switch
Tiptronic Switch
-
Switch off all electrical consumers.
-
Remove ignition key.
Removing
-
Remove driver's airbag.
-
Disconnect trim ring from steering wheel.
-
Slide multifunction button - 2 - out of steering wheel in direction of arrow.
-
Turn button around.
-
Disconnect harness connector - 2 - at multifunction button - 1 -.
-
Unscrew bolt - arrow - and remove Tiptronic switch to the rear.
