Q7 Quattro V8-4.2L (BAR) (2008)
‹› Shift gate selector lever in "S" position (as shown in illustration).
-
Insert micro switch - B - in shift gate and secure it with retaining pins - A -.
‹› Micro switch must lie flush on all sides.
-
Engage electrical line in tab - arrow C -.
‹› Retaining screws - A - secure micro switch - B - in shift gate.
‹› Ignition key removal lock does not function correctly if micro switch is not inserted correctly or properly secured.
-
Secure electrical line - arrow A - at selector mechanism according to illustration.