Q7 Quattro V8-4.2L (BAR) (2008)
/Page-1077004.png)
-
Install micro switch - B -.
‹› Ignition key removal lock does not function correctly if micro switch is not inserted correctly or properly secured.
-
Position connector - D - on Shift Lock Solenoid (N110).
-
Engage connector - E - from above.
-
Install shift gate. Refer to => [ Shift Gate ] See: Shifter A/T/Service and Repair/Removal and Replacement/Shift Gate
-
Install shift mechanism function unit. Refer to => [ Shift Mechanism Function Unit ] See: Shifter A/T/Service and Repair/Removal and
Replacement/Shift Mechanism Function Unit.
