Q7 Quattro V8-4.2L (BAR) (2008)
Seat Belt: Service and Repair
Belt Anchor
Belt Anchor
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
-
Position seat as far forward as possible using fore/aft adjustment.
-
Remove assembly cover - 1 -.
-
Press securing spring - 2 - outward using screwdriver (max. 4 mm tip width).
-
Press belt anchor down on T-pin - 3 - in direction of - arrow - to limit stop.
-
Pull belt anchor - 1 - outward from T-pin on seat - 2 -.