Q7 Quattro V8-4.2L (BAR) (2008)
-
Remove fuses, relays or control modules.
-
Remove securing clip - 1 - from fuse holder.
-
Release securing clips - arrows - and remove plug-in socket - 3 - from mount - 2 -.
-
Remove connectors from plug-in socket.
NOTE: Precise assignment of relay and fuse carrier in plenum chamber electronics box can be seen from appropriate wiring diagram.
Installing
Install in reverse order of removal, observing the following:
-
Connect battery. Required actions.
-
Adjust wiper arms.
Tightening torque
Component
Nm
Cover to E-box plenum chamber
2.5