Q7 Quattro V8-4.2L (BAR) (2008)
/Page-1979002.png)
-
Raise floor covering - 2 - slightly in ground wire area.
-
Remove nut - 3 - and remove ground wire - 4 - on ground point.
-
Pry covers - 1 - and - 3 - out of floor covering with Pry Lever (80 - 200).
-
Pry cover - 3 - with Pry Lever (80 - 200) from floor covering.
-
Remove both front screws - 1 - on driver's seat console and tip console - 2 - up.
-
Pry out wire clip - 2 -.
