Q7 Quattro V8-4.2L (BAR) (2008)
/Page-2058008.png)
-
Unplug fiber-optic cable connection from control module or device.
-
Use small screw driver to release catch in fiber optic cable connector - arrow -.
-
Pull fiber optic cable basic module - 2 - out of connector housing - 1 -.
CAUTION!
‹› Make colored dots to mark assignment of fiber optic cable - 5 - to corresponding sockets in basic module - 1 -.
‹› Note the arrows - 3 - for allocation on the base module " IN" and "OUT".
