Q7 Quattro V8-4.2L (BAR) (2008)
-
Then remove cover in - direction of arrow B - from driver's seat console.
-
Pry cover - 1 - with Pry Lever (80 - 200) from floor covering.
-
Raise floor covering - 2 - slightly in ground wire area.
-
Remove nut - 3 - and remove ground wire - 4 - on ground point.
-
Pry covers - 1 - and - 3 - out of floor covering with Pry Lever (80 - 200).
-
Pry cover - 3 - with Pry Lever (80 - 200) from floor covering.