Q7 Quattro V8-4.2L (BAR) (2008)
/Page-1915002.png)
^ Record every step in the check list.
3. Repair if necessary.
4. If no fault is found, adjust the selector cable according to the Repair Manual.
5. If the fault reoccurs, replace the micro switch (F305) in the gearshift housing.
6. Attach the completed checklist and VAS printouts to the repair order. Warranty-requested documents received without checklist and VAS printouts
will be denied payment.
Case B - Chassis No. greater than 7D072861 but less than Chassis No. 8D014775
1. Read the fault memory. If fault is logged in Access/Start Control System group 05, follow guided fault finding.
2. Carry out the checks described in the attachment (Checklist for Audi Q7 Transmission Selector Mechanism).
^ Record every step in the check list.
3. Repair if necessary.
4. If no damage is found and DTC 00230 (Switch for gearbox position P-F305, disruption/short circuit to positive/ground, sporadic) is stored, replace the
micro switch (F305) in the gearshift housing.
5. Attach the completed checklist and VAS printouts to the repair order. Warranty-requested documents received without checklist and VAS printouts
will be denied payment.
Case C - From Chassis No. 8D014775
1. Read the fault memory. If fault is logged in Access/Start Control System group 05, follow guided fault finding.
^ Save a copy for TACS attachment.
2. Carry out the checks described in the attachment (Checklist for Audi Q7 Transmission Selector Mechanism).
^ Record every step in the check list.
3. Open a TACS case with GFF test plan attached and the check list results entered in to the contact. Call TACS for further assistance.
