Q7 Quattro V8-4.2L (BAR) (2008)
Starter Motor: Service and Repair
Starter
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Battery/Service Precautions/Vehicle Damage Warnings.
With 3.6L FSI
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire. Refer to => [ Battery Disconnecting and Reconnecting ] See: Battery/Service
and Repair/Removal and Replacement/Battery Disconnecting and Reconnecting.
-
Remove screws and remove front - 1 - and rear - 2 - noise insulation.
-
Remove catalytic converter bolts - 2 -.
‹› Disregard item - 1 -.