Q7 Quattro V8-4.2L (BAR) (2008)
/Page-2224002.png)
-
Load the (VAS 6190) with the weight - arrow - as shown in the illustration.
CAUTION!
‹› Place a toolbox or container weighing approximately 5 to 7 kg on the (VAS 6190) before installing the measuring sensors and moving
the mirror on the calibration beam.
‹› If weight is not put on the (VAS 6190), it could tip over when the mirror is moved and/or when the measuring sensors are installed.
-
Install the front wheel measuring sensors - 1 - on the (VAS 6190).
