Q7 Quattro V8-4.2L (BAR) (2008)
Suspension Control Module: Service and Repair
Level Control System Control Module
Special tools, testers and auxiliary items required
‹› Vehicle Diagnosis, Testing and Information System (VAS 5051 B)
Removing
-
If control module is replaced, select "Replace" function for respective control module in "Guided Fault Finding".
Use (VAS 5051 B) for this.
-
Remove the luggage compartment floor covering and vehicle tool kit on right side.
-
Release and remove the connectors - arrows - from the control module.
-
Remove control module - 1 -.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
-
Level control system control module, re-adapting, refer to => [ Level Control System Control Module, Programming ] See: Testing and Inspection
.