audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Stabilizer Bar, Sway Control > < Suspension Fluid Temperature Sensor|Locations
Page 1
background image

Suspension Mode Switch: Service and Repair

Load Level Button/Electric Trailer Hitch Pivot Button

Removing

-

Switch off ignition and remove ignition key.

-

Release luggage compartment right side trim cover - 1 - at place marked with - arrow A -.

-

Remove luggage compartment right side trim cover in - direction of arrow B -.

-

Disconnect electrical connector - 1 -.

-

Release retaining clips - arrows - and carefully press Load Level Button E539 / Electric Trailer Hitch Pivot Button E474 - item 2 - out of luggage
compartment right side trim cover.

Installing

Install in reverse order.

Stabilizer Bar, Sway Control > < Suspension Fluid Temperature Sensor|Locations