Q7 Quattro V8-4.2L (BAR) (2008)
-
Rotate support element spindles upward enough so that all mounting pins contact mounting points.
-
Attach the support element base plates to the (VAS 6131) and tighten to 20 Nm.
-
Disconnect left and right connectors - 1 - and - 2 -.
-
Subframe, securing, refer to => [ Subframe, Securing ] See: Procedures.
-
Remove bolts - 4 -.
-
Lower subframe approximately 50 mm and carefully remove breather line - A - from front final drive.