Q7 Quattro V8-4.2L (BAR) (2008)
Suspension Strut / Shock Absorber: Overhaul
Coil Spring Suspension Strut
Coil Spring Suspension Strut
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Engine-/transmission jack (V.A.G 1383 A)
‹› 12 mm socket (T10099) or 14 mm socket (T10099/1)
‹› Mount (T10149)
‹› Ball joint puller (T10187)
Removing
-
Remove wheel.
-
Remove the bolt - 2 -.
-
Disconnect drive axle from rear final drive. Use (T10099) or (T10099/1) to loosen bolts - 3 -.
-
Remove nut from tie rod end and press tie rod end off of wheel bearing housing.
-
In vehicles with level control system sensor, unscrew nut - 2 -.