Q7 Quattro V8-4.2L (BAR) (2008)
Wheel bearing, pulling out
-
Remove securing ring.
-
Mount tools as depicted in illustration.
Please note:
Offset of (T10205/6) must point toward rear final drive.
1. Threaded rod M20 (T10205/8-1)
2. Threaded nut M20 (T10205/8-2)
3. Hydraulic cylinder (VAS 6178)
4. Mounting tube (T10205/5)
5. Mount (T10205/4)
6. Thrust pad (T10205/6)
7. Threaded nut M20 (T10205/8-2)
8. Threaded rod M20 (T10205/8-1)
-
Pull out wheel bearing while holding device securely.
Pulling bearing inner race off wheel hub