Q7 Quattro V8-4.2L (BAR) (2008)
‹› Before assembling, coat contact surface with assembly paste.
19
Bolt, 20 Nm
20
Bolt, 8 Nm
21
Cover Plate
22
Wheel Bearing Housing
‹› Removal and installation, refer to => [ Wheel Bearing Housing ] See: Suspension/Rear Knuckle/Service and Repair.
Avoid contaminating with dirt and damaging the seal when setting down/storing.
‹› The wheel bearing - 1 - must always face up.
‹› Always set the wheel bearing down on the wheel hub - 2 -.