Q7 Quattro V8-4.2L (BAR) (2008)
Seals and Gaskets: Service and Repair
Left Selector Shaft Seal, Replacing
Left Selector Shaft Seal, Replacing
Special tools, testers and auxiliary items required
‹› Thrust piece (T10174)
Procedure
-
Remove screws and remove rear noise insulation - 2 -.
Vehicles with 8-cylinder. 4.2L FSI engine:
-
Remove selector lever cable heat shield - arrows -.
Vehicles with 6-cylinder, 3.0L TDI engine: