Q7 Quattro V8-4.2L (BAR) (2008)
Wheel Bearing: Removal and Replacement
Lower Control Arm, Wheel Bearing Housing, Wheel Hub and Wheel Bearing Assembly Overview
Lower Control Arm, Wheel Bearing Housing, Wheel Hub and Wheel Bearing Assembly Overview
1
Nut, 180 Nm
‹› Self-locking
‹› Always replace after removal.
2
Eccentric Washer
3
Eccentric Bolt
4
Nut, 150 Nm + 90°
‹› Self-locking
‹› Always replace after removal.
5
Lower Control Arm
‹› Removal and installation, refer to => [ Lower Control Arm ] See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front
Suspension/Lower Control Arm.
‹› Servicing, refer to => [ Lower Control Arm, Servicing ] See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front
Suspension/Lower Control Arm, Servicing.