Q7 Quattro V8-4.2L (BAR) (2008)
/Page-4408003.png)
-
Next, hand-tighten screws and then tighten to torque specification in - 1 to 4 - sequence.
-
Tighten screws - arrows - on center partition panel.
-
On vehicles with a 12-cylinder TDI engine, install the intake flap motor/intake flap motor 2 (V157)/ (V275).
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms ] See: Wiper Arm/Adjustments.
Tightening Specifications
