R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Disconnect the connectors - 1 - and - 2 - from the rear view camera system control module - 3 -.
-
Remove rear view camera system control module - 3 - with bracket.
Bracket, Removing
The sides of the rear view camera system control module are bolted to the bracket.
-
Remove the mounting bolts - arrows - and the rear view camera system control module - 1 - from bracket the - 2 -.
Installing
-
Install the bracket first.
-
Installation of the rear view camera system control module is the reverse of removal.
-
Perform calibration, refer to => [ Rear View Camera System, Calibrating ] See: Testing and Inspection.
Tightening Specifications, refer to => [ Rear View Camera System Overview ] See: Description and Operation/Description and Operation.
Rear View Camera
The Rear View Camera (R189) is installed in the center of the rear bumper cover between the license plate lamps.
-
Switch off all electrical consumers.
-
Remove the key.