R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Global Positioning System Module: Service and Repair
Vehicle Positioning System Interface Control Module
Removing
-
Remove the front passenger seat.
-
Lift the carpet under the front passenger seat.
-
Remove nuts - arrows - and remove the vehicle positioning system interface control module (J843) - 1 -.
-
Disconnect the connectors - 2, 3 and 4 -.
Installing
‹› Tightening specification, refer to => [ Front Relay Carrier and Fuse Panel Assembly Overview ] See: Maintenance/Fuses and Circuit
Breakers/Relay Box/Service and Repair/Front Relay Carrier and Fuse Panel Assembly Overview.
Install in reverse order of removal, observing the following:
-
Install the carpet.
-
Install the front passenger seat.