R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Remove the rear spoiler bolts - 4 and 5 -.
-
Remove the bolts - arrows - and front vehicle floor cover - 2 -.
All
-
Reach through opening.
-
Press both retainer tabs to side - arrows - and press sensor - 2 - from outside towards inside.
-
Disconnect electrical harness connector - 1 - at sensor.
Installing
Install in reverse order of removal, observing the following:
Inner sensor
-
Install front bumper cover.
Outer sensors
-
Install the front vehicle floor cover.