R8 Quattro Coupe V10-5.2L (BUJ) (2010)
-
Guide the outer headlamp bracket - 1 - with the outer bumper cover mount - 2 - out behind the bumper - 3 -.
-
Remove bolts - arrows -.
-
Remove the outer bumper cover mount - 2 - from the outer headlamp mount - 1 -.
Installing
‹› Gap dimensions => [ Front Bumper Cover Gap Dimensions ] .
‹› Tightening specifications => [ Headlamp, Wheel Housing Liner, and Radiator Brackets Assembly Overview ] See: Fender/Front Fender/Front
Fender Liner/Service and Repair/Headlamp, Wheel Housing Liner, and Radiator Brackets Assembly Overview, => [ Bumper Cover Assembly
Overview ] See: Bumper Cover Assembly Overview.
Installation is reverse of removal, but note the following:
-
Install the headlamp.