R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Front Bumper Cover / Fascia: Service and Repair
Center Bumper Cover Mount
Center Bumper Cover Mount
Removing
Proceed as follows:
-
Remove the bumper cover center section => [ Bumper Cover Center Section ] See: Bumper Cover Center Section.
-
Remove the rear bumper cover => [ Rear Bumper Cover ] See: Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Rear Bumper Cover
.
-
Disconnect the engine compartment lid spoiler electrical connector.
-
Remove the electrical connector from the bracket.
-
To do this, press the release in the - direction of arrow A - and remove the electrical connector - 1 - from the bracket - 2 - in the - direction of
arrow B -.
-
Remove bolts - arrows -.
-
Remove the center bumper cover mount - 1 - while guiding the engine compartment lid spoiler electrical connector out.
Installing