R8 Quattro Coupe V10-5.2L (BUJ) (2010)
Front Bumper Reinforcement: Service and Repair
Impact Absorber
Impact Absorber
Removing
Proceed as follows:
-
Remove front bumper cover.=> [ Front Bumper Cover ] See: Front Bumper Cover / Fascia/Service and Repair/Front Bumper Cover.
-
Remove the headlamp washer system fluid line - 1 - from the impact absorber - 2 -.
CAUTION!
There is a risk of it breaking.
‹› To prevent the retaining tabs - arrows - from breaking off, carefully remove the impact absorber from the bumper cover at the outer sides.
Installing
Installation is reverse of removal, but note the following:
-
Install the front bumper cover => [ Front Bumper Cover ] See: Front Bumper Cover / Fascia/Service and Repair/Front Bumper Cover.